1. OIM (Drilling Experience essential)

2. Toolpusher

3. Driller

4. Chief Mechanic

5. Chief Electrician

6. Mechanic

7. Electrician

8. Barge Master

9. Heavy Lift Crane Operators (Mobile Offshore Drilling units experienced)

10.Materialsman

POSITION APPLIED FOR: SENIOR RIG MECHANIC

OBJECTIVES:

To be able to join the company by applying the knowledge acquired through past experience and
Enhancing it further not only for the personal career growth but also for the fulfillment of the
Company goal.

WORK EXPERIENCE:

1.Company Name : POOL ARABIA CO. LTD.
Company Address : DHAHRAN, K.S.A
Position : JR. SCR. RIG MECHANIC
Job Location : CYBER RIG P.A 660
Date Of Joint: 2004 to until.

JOB DESCRIPTION:

A.Trouble shoot, maintain and repair all mechanical equipments top drive ( canrig / varco ),Rotary table, Draw works, mud pump ( national / gardner Denver ),cat engines, deck cranes, shale shakers, jack up gear boxes, iron roughneck, de-gasser, HPU, skidding system and all other rigs equipments and advices the mechanical supervisor on the condition equipment and maintain services reports, install new equipment, inspect, test, and repair, rig equipment.

B.Maintain and preventive maintenance program ( RMS ) accordance with company repair And preventive maintenance procedures as directed by immediate supervisor.
C.Perform in line the generator set through( SCR/VFD ) and overview the rated speed at rated load to prevent engine running at normal speed.
D.Ensure there is always an adequate stock of parts, tools and consumables required to
maintain the equipment for which they are responsible.
E.Reports on parts, tools and supply needed to maintain the equipment for which they are
responsible.
F.Cary out mechanical isolation to be work.
G. Cary out task as part of multi-discipline maintenance team as operational requirement dictate.
H.Stand in for alternative works discipline as required.
I.Perform preventive maintenance services in accordance with the engine specification and obtain valve lash as per operating hour.

2.Company Name : OJAIME CONT. CO
Company Address : DAMMAM K.S.A
Position : Chief Heavy Mechanic
Date Of Join : 2005-2007
Job Description : Engine and transmission overhauling for American light truck and cars such as E40D-E4LD-4L60E-700-240R-4L80 and Japanese cars.

Company Name: AL-JAZEERA MOTORS
Company Address : JEDDAH K.S.A
Position : LIGHT / HEAVY MECHANICS
Date Of Join : 1994-1996
Job Description : Overhauling for all types of engines American and Japanese regarding to the customer complain.

Company Name : STA FE ( BETCHTEL)
Company Address : STATE OF KUWAIT
Position : HEAVY MECHANICS
Date Of Join : 1991-1993
Job Description : Preventive maintenance for rig mover of KOC Sta fe like Kenworth trucks, OFB Trailer, Low Bed, Fork lift, Dozer and Crane.

Company Name : AL-ATAFI WORKSHOP
Company Address : RIYADH, K.S.A
Position : AUTO – MECHANICS
Date Of Join : 1985-1989
Job Description : Repairing all types of American and Japanese cars.

Company Name : PICOP ( PAPER INDUSTRIES CORP. OF THE PHILS. )
Company Address : PHILIPPINES
Position : HEAVY MECHANICS
Date Of Join : 1975-1985
Job Description : Engine and transmission overhauling of caterpillar D-125 Kenworth 350 V-8 Euclid GM and CUMMINES

EDUCATIONAL BACKGROUND :

UNIVERSITY OF MINDANAO DAVAO CITY.
B.S MECHANICAL ENGINEERING
1981-1984 UNDERGRADUATE

ABELLANA NATIONAL SCHOOL CEBU CITY.
1968-1972.
SECONDARY.

LAHUG ELEMENTARY SCHOOL CEBU CITY.
1962-1968
ELEMENTARY.

PERSONAL DATA :

NICKNAME: PHILIP
BIRTHPLACE : CEBU CITY
BIRTHDATE : AUGUST 06, 1956
WEIGHT : 72 Kg, 145 lbs.
HEIGTH : 5’ , 4”
NAME OF WIFE : TERESITA P. VITUALLA
CHILDREN : RONNEL P. VITUALLA
MADILYN P. VITUALLA

CHARACTER REFERENCE :

JAY PEE M, ROSALES
AUTOCAD OPERATOR
STA CLARA INTERNATIONAL CORP.
LUMBAN, LAGUNA. PHILS.
# 09274336471

LUIS MANANGO
ELECTRICIAN
NABORS DRILLING COMPANY LTD.
DHAHRAN SAUDI ARABIA K.S.A
# +966550683432

I HEREBY CERTIFY THAT THE ABOVE INFORMATION ARE TRUE AND CORRECT ACCORDING TO THE BEST OF MY KNOWLEDGE AND ABILITY.

**Career Objective
I am seeking a full time job with a multinational firm to enhance and develop my interpersonal and technical skills and to build up my experience in mechanical engineering involving applications of engineering principles such as heat and mass transfer, thermodynamics, fluid mechanics and maintenance with possible exposure in the field of Oil &Gas industry.
University South valley
Faculty : Engineering.
Major : Mechanical.
Year of graduation : May 2002
B.Sc. Project : central air condition
**Education
**Experience (offshore and onshore)
#.(location: Basra-Iraq) chief Mechanic Engineer,schlumberger and IDC Drilling Co. ( from 5/2010 to till now . super rig SCR &VFD with. Top-Drive (Varco ) (land rig)
#.11/2007 to 4/2010 chief Mechanic Engineer , Sinotharwa Drilling Co.
super rig SCR with. Top-Drive (Varco ) (land rig)
# 9/2006 to 11/2oo7 Mechanic Engineer, EDC Drilling Co.
super rig SCR with Kelly, Top-Drive (Varco ) (offshore, jack up )
# 8/2005 to 9/2oo6 Assistant Mechanic Engineer, EDC Drilling Co.
super rig SCR with Kelly, Top-Drive (Varco )(offshore, jack up )
# 1/2004 to 7/2005 Maintenance Engineer (Engines, Hydraulic,power train) O-trac Co.
# 1/2003 to 11/2003Assistant Mechanic Maintenance Engineer .( diesel engine overhaul) Armed Forced Workshop

** RESPONSIBILITIES Perform daily inspections and maintenance on mechanical equipment, Organize and promote the Preventive Maintenance System (PMS),Carry out periodic maintenance according to the PMS guidelines and coordinate same with supervisors and other department heads, Operate, maintain and repair as necessary the engine cooling water system, lube oil system, and fuel system, Troubleshoot and repair faulty mechanical, pneumatic and hydraulic drilling equipment and too, Ensure the permit to work and isolation systems is followed, Implement the follow up requirements to audits, as issued by Clients, Regulatory Authorities or rig management, Assist in ensuring that all third party equipment is fit for purpose, certified, correctly installed, and maintained while on the rig, Maintain an adequate supply of spares in order to fulfill maintenance requirements and facilitate a safe and efficient operation, Ensure that service, maintenance and other operational reports are accurate and complete, Liaise with the marine department regarding the loading, ordering and use of fuel, potable water, and drill water in consideration of the rig’s stability, Inform supervisor and other department heads of any technical problems or limitations that may affect the safe operation of the rig, Plan and coordinate with other departments prior to any major activity such as rig moves, running and retrieving BOP, et cetera, Carry out classification society surveys as part of continuous survey of machinery, Communicate equipment problems or breakdown information via direct supervisor to Field Support Group.

QHSE:
- Demonstrate commitment to Company safety policies through leadership and guidance, Ensure regulatory requirements for environmental protection are complied with, Actively participate in weekly safety meetings and pre job meetings as required, Report any incidents, potential hazards or abnormal situations to supervisor and other department heads, Assist in preparing Job Safety Analysis for hazardous situations, Ensure a high standard of hygiene and housekeeping is maintained onboard the rig, Assist in reviewing and updating the current safety case in consultation with rig and shore-based management.

Organization name Place Program/Field of study
Personal The Arab academy for science and technology and maritime transport Personal survival techniques and search and rescue 2/2005-2/2010
Personal The Arab academy for science and technology and maritime transport Fire prevention and fire fighting 2/2005-2/2010
Personal The Arab academy for science and technology and maritime transport Medical emergency basic training “Elementary first aid” 2/2005-2/2010
Personal The Arab academy for science and technology and maritime transport Personal safety and social responsibilities 3/2005-3/2010
Egyptian drilling company(EDC)
EDC office
General Safety

EDC
EDC office
Job Safety Analysis

EDC
(Practice Course)

EDC workshop

Working within team for overhauling SCR rig including (Rotary transmission, Swivel, Traveling block, Crown, Air tuggers, Mud pump, Chock manifold and Centrifugal pumps)

sinotharwa drilling co.
office
Rigging and slinging
sinotharwa drilling co. office
safety &h2s
sinotharwa drilling co. office Accumulator, mud pump
sinotharwa drilling co. office develop future manager
**Training course

**Personal Skills

Language skill -Arabic: Mother tongue.
-English: Good

Computer Skill Windows Me, XP and Vista & Microsoft Word, Power point, Excel, Internet, Q-Basic,. Able to learn and use any program would be useful.

Management Skill

-Short and long terms planning.
-Leadership, dependable and oriented results.
-Communications and well-organized.
-Analytical and problems solving.
-Applying polices and procedures of the firm.
-Minimize the costs and the expenses.

Other -Helpful, positive attitude and creative.
-Self-motivated and energetic.
-Flexible and dynamic.
-High IQ.

**Personal Data
Date of birthday January 28, 1978.
Place of birthday Egypt.
Nationality Egyptian.
Religion Muslim
Gender Male.
Current address 26 -Bakr Siddique Street -Bulaq Dakrur –Giza
Martial status Married
Military status Completely military service.

Personal Information:
Date of birth : feb 15th 1966
Place of birth : Khenchela (Algeria)
Citizenship : Algerian
Driving licence : type “A B C”
Marital Status : Married+5
Contact :
Address Ouled rechache
40000 Khenchela
W. de Khenchela Alegeria.
Mobile Phone : 0661 16 75 38
E-mail: lastnameammari@yahoo.com

Target job

The opportunity to use my knowledge and my experience in the mechanic and improving my level and to work as chief mechanic in this big company

Degrees:

1. State technician mechanic special vehicles high school Algerian air force [1982. 1984] (declared good)
Training high school Russia 1984 1985 (declared good)
2. Background knowledge in drilling
3. Well cap certification
4. Stuck pipe prevention
5. First aid
6. Well control equipment
7. Mud system
8. Fall protection
9. Confined space
10. Rigger training
11. BOP M / I / T

Experience:

1985 to 1991 :
Position : technician special vehicles Algerian air force hydraulique and pneumatique system . power generating units . Compressor. Station of gasification oxygen

Zone Algeria

2 YEARS : Chief mechanic assistant fora sol
2 YEAR : Chief mechanic forasol
3 YEARS : Translator filode company LYBYA
3 YEARS : Chief mechanic
Company : Parker Drilling Company Rig 265
NOW : 2010 KCA DUETAG T212 Chief Mechanic
Equipment:
3512cat 3400cat
C 15
Perkins
Varco top drive 9 . 11
Canrig
tesco
Ingersoll rand compresseur
Atlas copco
F1600 MUD POMPE
Wirth pumps
VOLVO DJON DEER

FORKLIFT CAT 950 – 930

LIEBHERR CRAN

Terex
BOMCO RIG

Bentec rigs
National
Language

English : very good
French : Language of study
Arabic : Native language

Computer skills :
Highly skilled with computers, including:

- WINDOWS XP , MSOFFICE (Word, Excel, PowerPoint ,outlook

An accomplished enthusiastic mechanic with 20 years experience on a large range of equipment. Trained by the British Military to maintain and repair all types of equipment. Four years offshore experience as senior mechanic on Jack-up and drill ship installations. Able to work in often hostile environments. An excellent communicator both oral and written who is confident and adept at instilling confidence in others. Able to work on own initiative in difficult conditions. Proven ability to work to a very high standard and reach often increasing demands with little or no support. Recommended for promotion in Africa and Brazil.

Key Skills.

- Experienced on EMD, Caterpillar and Detroit diesel main movers. Ensco drawworks, all types of pumps, hydraulics, pneumatics, Air compressors, water-makers, TDS, winches, National oilwell, Dreco and Link belt cranes. Also recently attended SAP training.
- Four years experience working offshore as senior mechanic on jack-up and deep sea installations in West Africa and Brazil. Supervising and training junior mechanics.
- Fluent in German language.
- Managed work forces of up to 20 tradesmen solving both technical and personal problems.
- Able to direct less accomplished tradesmen and instruct clearly and concisely.
- Very good appearance and bearing. Disciplined and trustworthy.
- Punctual.
- Able to learn quickly whilst still producing a high standard of work.

Career History.

1990 – 2003 H.M Forces (Army)
Mechanic. Royal Electrical and Mechanical Engineers. Responsible for the repair and maintenance of all vehicles and equipment. Workshop supervisor.

2003 – 2006 British Telecom.
Translator: Manager on contract with the M.O.D to provide Telecommunications for the British Forces in Germany.

2006 – Present Noble Drilling. Senior mechanic responsible for the repair and maintenance of all rig equipment. Three years working on Jack-up installations in West Africa as senior mechanic. Responsible for all rig equipment maintenance and repair, including main engines (EMD) and complete drilling package.
Have spent the last year working on the drill ship Leo Segerius in Brazil. Responsible for the repair and maintenance of all rig equipment including mud pumps, top drive, draw-works, National Oilwell kingpost cranes and all other related drilling package equipment. Also responsible for the inspection of rig equipment and ensuring that the maintenance program is carried out on time and to a high standard. Other key tasks include training junior mechanics and ensuring that daily rig inspections are carried out correctly.

Technical skills.

- Completed City and Guilds part 1,2 and 3 in vehicle technology and engine technology.
- Responsible for the maintenance and repair of all equipment on jack-up rig in West Africa and on drill ship in Brazil. Also spent 9 months in shipyard whilst undergoing major hull repairs and equipment overhaul, including complete overhaul of main engines, jacking gear and Draw-works. Also installed new equipment including compressors, air dryer, brake cooling deck and watermakers.
- Carried out inspections on a wide variety of vehicles and other equipments to M.O.T standard. This entails vehicle inspections and vehicle equipment inspections.
- Responsible for the supervision of tradesmen who are trained in a different trade group and expected to advise on matters in which no formal training has been given.
- Co-ordinated the setting up of the vehicle inspection bay, with database to encompass the inspection of around 250 vehicles.
- Experienced on many types of equipments. This could entail complete strip and rebuild of component parts.
- Set up the contract with Deutsche Telecom to provide telecommunication support to the British Forces in Germany for the M.O.D.

Organisational Skills.

- Planned and organised social events for over 100 people. This entailed organising the whole event and distributing tasks to a hand picked committee.
- Co-ordinated training for subordinates in career advancement and leadership enhancement weekends.
- Created the process for fault reporting and order submitting for the whole of the contract between M.O.D and Deutsch Telecom

Education and Training.

BOSIET (RGIT) Basic offshore Safety (including HUET and EBS)
City and Guilds parts 1, 2 and 3 in motor vehicle technology and engine technology
X8 GCSE including Maths, English and Science.
CLAIT (computer literacy and information technology)
Colloquial German.
Level 2 certificate in book keeping
Personal Details.
D.O.B 27 October 1971
Driving licence including C+E (restricted)
Registered member of the IFA (Institute of Financial Accountants)

PROFILE
An accomplished Mechanical Engineer with expertise in the field of Maintenance & Overhauling of various Mechanical Equipments and Plants.
Well-organised and motivated individual with strong presentation and communication skills
Excellent team spirit and capable of interacting effectively with other discipline engineers
Great ability to perform multi-task and shift priorities simultaneously
Great interpersonal skills; and comfortable working effectively both independently and in a team environment
WORK EXPERIENCE
Royal Saudian Coast Guard, Jeddah 1999 – Present
Maintenance Supervisor

Working on different types of Diesel Engine Generator Units and Propulsion Units are given below.

MAN 2566MTE 153KW GERMANY
DEYUZE 150KW GERMANY
G.M DETROIT 16V 2305KW USA
M.T.U 538 16V 2970KW GERMANY
M.T.U 396 12V 1600KW GERMANY
M.T.U 183 12V 615HP GERMANY
VOLVO PENTA D-42 220HP SWEDEN
VOLVO D-43 230HP SWEDEN
VOLVO PENTA D-12 500HP SWEDEN

Maintenance and Overhauling of Fuel Transfer Pumps, Anchor Motors
Maintenance of Gear Box ,Shafting & Propeller adjustment, alignment, AVR Card, Governor Card and Actuators during Test and Trials of Diesel Engines.
Maintenance of Diesel Water Separator, Stearing System, Fuel Injectors.
LOW PRESSURE COMPRESSORS
HOLMAN (Cummins Engine Drive LTA-10 C-290, 150PSI)
SULLAIR (CAT Engine Drive 3306 LTA, 150 PSI)

WELDING GENERAORS
PERKINS (D-3-152, 1800 RPM, 40-300AMP)

MANAGEMENT & DOCUMENTATION CONTROL
Supervise the maintenance team for the maintenance routines, planned and emergency maintenance activities, OPDEF (Operational Defects) of Diesel Engines up to 600 KW and Air Compressors.
Test & trials of Diesel Engines after TOH & MOH.
To make sure the PMS & MMS routines of POWER PLANT, Diesel Engines, Compressors, Welding generators.
To organize the skills development programs for maintenance and new personal
Monitor ISO 9001 Documents keeping procedure.
Preparation of work orders to the co-ordination departments.
Maximum productivity through proper planning of equipment and training of labour force.
Make sure the completion of job/work within the assigned time.

Pakistan Navy, Dockyard, Karachi 1992 – 1999
Maintenance Supervisor

Working experience with Pakistan Navy as Mechanical Supervisor in maintenance,overhauling,fault finding in Turbo Charger,Diesel Engines,Diesel Generators, Diesel Power Plant upto 2000KW(Puma Power Plant) on Board and Fix Machinery.
Monitor the development and implementation of Maintenance Management System (MMS) and maintain all record of Maintenance MARINE DIESEL ENGINES

PAXMAN VENTURA 16YJCAZ 1000KW U.K
PAXMAN VENTURA 12YJCAZ 750KW U.K
BEDFORD 33G.M 50KW U.K
NIGATA 550BHP JAPAN
NIGATA 5OOBHP JAPAN
DAIHATSU 1000BHP JAPAN
G.M DETROIT 12V 1600KW USA
FAIR BANK MORSE 500KW USA
MERCEDES BENZ 183HP 250KW GERMANY
GM 567 500KW USA
EDUCATION
B.Tech. Mechanical Engineering (Hon’s) 2005 – 1994
N.E.D University, Karachi, Pakistan
Diploma in Mechanical Technology 2004 – 1992 Pakistan Navy Dockyard Training School
Bachelor of Art (Part Time) 1992 – 1994
Karachi University, Pakistan
Master of Art (Part Time) 1994 – 1996
Karachi University, Pakistan
CERTIFICATE COURSES
First Aid at Sea 1997
Pakistan Maritime Complex
Personnel Survival Technique 1997
Pakistan Maritime Complex
Fire Fighting Course 1997 Pakistan Maritime Complex
PROFESSIONAL MEMBERSHIPS
Member Pakistan Engineering Council
COMPUTER COURSES
6 Month course for MS-Office & Internet
LEISURE ACTIVITIES
Playing Cricket, Football, and Basketball
Like to travel to different places and get to know different people and culture.
Learning different Languages, watching TV and socialising with friends.
REFERENCES
Available on Request